Journal des essais cliniques
Libre accès

Abstrait

Trace Metals in the Arabian Seawater and Freshwater Samples in Oman by Using By ICP-OES

Md Amzad Hossain, Ayman Alsaid Ibrahim Alsaid, Aya Mohammed Amin Ahmen, Rayyan Hamed Al Qamshouai, Mohammad Sohail Akhtar, Salem Said Jaroof Al Touby

Water is an inorganic, transparent, tasteless, odorless, colorless liquid which is the main component of the earth and living organisms. Trace metals are elements that usually occur at very low levels in the environment. These metals are needed for life. However, at high concentrations of the trace metals can be toxic. The contamination with trace metals in water samples are health hazards and it can create many health problems such as liver, kidney, and intestinal damage, anaemia, and cancer. Therefore, the aim of this work was to assess the levels of Lead (Pb), Arsenic (As), Nickel (Ni), Chromium (Cr), and Cadmium (Cd) in the sea and freshwater samples, which was collected from five major seaport areas in Oman and one fresh water canal by using sensitive Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES). To achieve these objectives, sixty-four water samples were collected from six different locations in Oman. A total sixty seawater samples were collected from Matrah port, Al Mouj Marina, Sohar port, Salalah port, and Al Duqm port and four freshwater samples were collected from Falaj Daris. The conductivity of the collected seawater samples were very high therefore, the seawater samples were diluted 200 times and analyzed by ICP-OES. The results obtained from ICP-OES showed that the level of all analyzed water samples, the concentrations of trace metals (As, Ni, Cd, and Cr) in sea and freshwater samples were within the permissible limit except the concentration of Pb, which exceeded the permissible limit in several samples. The toxic Pb contaminated water samples can create a health risk therefore appropriate water treatment should be applied to reduce the concentration of Pb within the safe limit so the accumulation of toxic waste in both humans and animals can be avoided. So far of our knowledge, the ICP-OES method is the first analytical technique for the detection of toxic heavy metals in water samples. In conclusion, the developed method could be used routinely for the detection of heavy metals in water samples.